Custom Stand Builder
Got a non-standard synth, drum machine, controller or setup? Design your custom desktop stand down to the millimeter. Adjust the sliders below, 3D geometry and pricing update in real time.
3D Builder
Custom Stand Price
27 €
3D Material
147 cm³
Print Time
~3h 40m
STL Export & Specs✕
How to measure your gear in 30 seconds
Stand Width
Measure the total width of your instrument.
Pro tip: subtract 20–30 mm from your unit's total width so the 20 mm side panels sit cleanly inside the original rubber feet.
Support Depth
Measure the bottom panel of your synth from front to back. If your machine has bulky MIDI, USB, or audio plugs on the rear panel, add a few extra millimeters of clearance.
Angle, Lip & Clearance
Set the front lip height to match your unit's front bevel. Increase Desk Clearance (10–100 mm) to route cables underneath or overlap your synth above another unit on your desk.
Designed by You.
Stabilized by Our Algorithm.
You don't need to be a CAD engineer to build a rock-solid stand. As you move the sliders, the Restand Builder 3D engine automatically adapts the structure for studio and stage stability:
• Anti-Tip 2/3 Footprint: At steeper angles or high elevations, the base automatically extends to maintain at least 2/3 of your support depth. Zero risk of tipping when playing pads hard.
• Automatic Diagonal Bracing: Over 200 mm of depth, the frame automatically generates an internal diagonal strut to support heavier machines without flexing.
• Third Anti-Torsion Rod: From 60 mm of desk clearance upwards, a third rear wooden rod is automatically added at the base to lock out any lateral wobble.
Specifications & FAQ
What’s included in the box?
Every custom stand comes complete with:
• 2x Custom 3D-printed side panels in high-density Matte Black with 45° chamfered edges.
• Solid beechwood rods (Ø 10 mm) precision-cut to your exact width (2 or 3 rods depending on desk clearance).
• Countersunk screw kit for a flush, clean assembly.
• Top anti-slip grip strips and 4x bottom rubber pads seated inside 0.5 mm recessed pockets so they never slide or peel off.
How long does production take?
Because every Restand Builder 3D stand is custom-printed and hand-finished to your exact millimeter specifications, production takes 2 to 4 business days before shipping.
Is assembly easy?
Yes! Assembly takes less than 2 minutes with a standard Phillips screwdriver. The wooden rods slot into precision 10 mm internal sockets and lock in place with the included countersunk screws.
Can I use it for laptops, mixers, or effects pedals?
Absolutely. As long as your device fits within the 150–400 mm width and 150–300 mm depth range, you can tailor the tilt angle and front lip height for drum machines, desktop synths, DJ controllers, audio interfaces, or pedalboards.